Established homes on established walls

Garsfontein grew as a family suburb, and many of its houses date from the late 1970s and 1980s. Freestanding homes on reasonably generous stands are common, with plastered or face-brick boundary walls that have been raised, patched or extended over the years. Some streets also have newer cluster complexes built where larger stands were subdivided.

An older wall can carry a fence well, but the installer will look for loose capping, hairline cracks and sections that were built to different heights. Uneven tops mean brackets have to be set carefully so the strands keep a consistent spacing. You can read about the suburb itself on the Garsfontein area page.

Choosing the system for a Garsfontein boundary

Most Garsfontein owners go with wall-top brackets, either straight or angled outwards. Angled brackets lean the strands away from the property and are often chosen for street-facing walls. Where an old wall is too weak for brackets, posts set just inside the wall make a freestanding fence that does not rely on the brickwork.

If part of your boundary is a palisade added later, for example beside the driveway, a piggyback system can be clamped onto it. Mixing types on one property is normal. The guide to choosing between wall-top and freestanding fencing covers how installers decide.

Factors behind a Garsfontein quote

There is no fixed price for a fence, and this website does not quote one. These are the things an installer weighs up on a Garsfontein property:

  • Wall condition, and whether loose capping or brickwork must be fixed before brackets go on.
  • Height differences between wall sections, which add bracket work at every step.
  • Straight or angled brackets, and how many strands each one carries.
  • Gates, which need a way to carry the fence across or neatly around the opening.
  • Distance from the energizer position to the furthest corner of the stand.
  • Whether a backup battery and a link to armed response are part of the job.

Handover and the certificate

When the fence is up, the installer should test it and hand you an Electric Fence System Certificate of Compliance. A new electric fence must meet the requirements of SANS 10222-3, and the user or lessor must hold a valid certificate (ECA(SA)). Keep it with your house papers; you will need it if you sell. The electric fence COC service page explains more. This is general information, not legal advice.

Asking for a quote

Tell us roughly how long your boundary is, which sides you want covered and whether the wall has been altered over the years. We pass your enquiry to an installer working in Garsfontein. Enquiries are meant to go only to registered installers. [CONFIRM: installer EFSI registration evidence - plan ยง8.2] Ask the installer for proof of EFSI registration before you accept a quote. For a fuller breakdown, see what affects electric fence cost in Pretoria, and for the general process, electric fence installation in Pretoria.

Prices and quotes

We do not publish prices. The installer quotes you directly after seeing the property in Garsfontein. The general factors are on the Electric fence installation page, and our guide to what moves an electric fence quote in Pretoria explains how to compare quotes.

Frequently asked questions

My Garsfontein wall has cracks. Can it still take an electric fence?

Often yes, after minor repairs. The installer will check whether the wall can hold brackets or whether posts would be the safer choice.

Should the brackets lean in or out?

Outward-angled brackets are common on street-facing walls. Straight brackets often suit walls shared with a neighbour. Discuss the choice with the installer.

Can one fence cover a wall and a palisade section?

Yes. Many properties combine a wall-top section with a piggyback section on palisade, both run from one energizer.

Related pages

Electric fence installation in Garsfontein: request quotes

Fields marked * are required. We use these details only to pass your enquiry to an electric fence installer who covers your area. See our privacy policy.

Give a phone number or an email address so the installer can reach you.